Collect, drain, and dry 20-30 coke cans.
Date: 06/30/2006
Using a crochet or knitting needle, pull the metal tab back into place as close as possible.
Date: 06/30/2006
Attempt to do this without slicing off your own fingers, entire hand, etc.
Date: 06/30/2006
Using a glue gun, seal the can around the sharp edge of the tab,
Date: 06/30/2006
..so that no one will bleed while trying to set this up.
Date: 06/30/2006
Use the hot glue to build up areas that are father apart.
Date: 06/30/2006
Arrange the cans on the bottom tier around the container pump.
Date: 06/30/2006
Use hot glue to attach cans together within your desired pattern.
Date: 06/30/2006
The tier should be left open in the rear so that your pump cord can easily be run from the back of the pump.
Date: 06/30/2006
Do the same for the seconf tier.
Date: 06/30/2006
Glue should touch each can.
Date: 06/30/2006
For the top of the fountain, take one can and cut the top out so that the fountain coupler can sit in the hole- the can will cov
Date: 06/30/2006
IMG_1006.JPG
Date: 06/30/2006
The complete fountain, minus the top can/coupler of the fountain.
Date: 06/30/2006
The complete fountain.
Date: 06/30/2006
